FAQ

FAQ 2018-04-13T03:13:50+00:00

Punched Rail is manufactured with holes for round pickets. Sadly a badly punched rail will not be discovered until the job is paid for and it is installed on your property. We are happy to provide a sample of our punched rail upon request.

To extend the life of powder coatings and protect any warranty requirements that may exist, a very simple regular maintenance program should be implemented for the removal of any residues. The presence of dust, grime and salt deposits is a major cause of corrosion and must be cleaned at regular intervals. Products in a coastal environment or even products encompassing a salt chlorinated pool should be cleaned every 2-3 months. A wipe over with a soft cloth or sponge using warm water and detergent will remove the dust and grime, while a phosphoric acid based cleaner is recommended for removal of bore water stains and salt build up.

The pool fence has been designed so when installed correctly it will comply with Australian standards for Pool Fencing.

Local Councils follow the Australian Standards guidelines, a building permit is required before installing a new pool fence. Craftsman Fencing can provide the necessary documents.

The standard height requirement is 1200mm. Our fences have a finished height of 1250mm.

Our glass is of the highest quality and has been tested by NATA (National Association of Testing Authorities) and have design compliance certification in accordance with AS1926.1 Safety barriers for pools.

We provide the full range of powdercoat colours. The available range of colours can be viewed in the Dulux Powdercoat Colour Chart BrochureInterpon Colour

Yes, for tubular fencing the posts will require special base plates to facilitate attachment to the timber decking. We require bracing beneath the decking to ensure strength to support posts. Any movement of the timber in the future can cause the fence to move.

Yes. ClearShield is perfect for glass pool fencing. It will protect against corrosion and etching from contaminants including sea salt, salt and chlorinated water, bird droppings and pollution. Untreated glass is porous and as a result it absorbs contaminants and pollution which causes deterioration and discolouration. This deterioration etches and corrodes the surface making cleaning more frequent and difficult. ClearShield seals the porosity and prevents this from occurring.

Get A Free Quote

Building Fences the Right Way!

Give us a call for a free measure and quote on any fencing or gate requirement within our range.

Only takes a few seconds!

Our Home Owners Say

“Just wanted to let you know how happy we are with the fencing and gates you installed at our house a few weeks ago. We have had very positive comments from family and friends and even the garage door installer.”

Alastair, Como

“Just wanted to let you know how happy we are with the fencing and gates you installed at our house a few weeks ago. We have had very positive comments from family and friends and even the garage door installer.”

Mike, James